PACCAR. MX13 18 speed, 13 speed, 10 speed, automatic Dimensions 285 in (7,200 mm) typically Chronology Predecessor Kenworth 500-series Kenworth 900-series Successor Kenworth T900 (Kenworth Australia) The Kenworth W900 is a model line of conventional-cab trucks produced by the American truck manufacturer. Distinguished by its long hood length, the W900 is one of the longest-produced model lines in American automotive history, having remained in production since 1961. Produced nearly exclusively as a semitractor, the W900 ('W' stands for Worthington, the second half of the Kenworth name ) remains popular as a truck used by; along with the, the W900 is a popular basis for truck customization, with many owners adding additional chrome plated trim, wheels, and lights. Contents. Background In 1956, Kenworth introduced the 900-series conventional-cab truck, replacing the 500-series introduced in 1939.
As with its predecessor, the 900-series shared the chassis of the Kenworth cabover, replacing the 'Bullnose' Kenworth COE with the Kenworth K900. As before, a side-opening 'butterfly' hood was standard, but a forward tilting fiberglass hood became an option for the first time.
In 1961, Kenworth introduced the W900 conventional as the replacement for the 900-series. As part of several major design changes, the cab was completely redesigned, raising the height of the cab roof and windows and mounting the two windshield panes together. To better allow for engine cooling, the radiator was widened slightly, with the tilting hood made standard.
While the headlights remained fender-mounted, the housings were faired into the fenders. Model overview In production for over 57 years, the Kenworth W900 has been produced in three basic generations: the 'narrow-hood' W900 (1961-1966) and the 'wide-hood' W900A (1967-1982) and W900B (1982-present). Currently (as of 2018) there are three versions of the W900B sold. Alongside the standard W900B, there is the extended-hood W900L (introduced in 1989) and the sloped-hood W900S (introduced in 1987); the W900S is similar to the T800, except for its set-forward front axle. Deped curriculum guide in filipino.
W900 (1961-1966) In contrast to the 900-series and 500-series Kenworth conventionals, the cab introduced 'bulkhead-style' doors (with full-length hinges). In another change, the roof panel was changed from metal to fiberglass. While functionally different, the W900 retained the wide-style vent windows, with door handles mounted below the windows. W900A (1967-1982) In 1967, the W900 underwent its first major change and was renamed the W900A. To accommodate larger diesel engines, the hood was widened several inches to further increase radiator size. For 1972, the doors of the W900 were changed, with the model adapting larger windows, narrower vent windows; for ease of use, the door handles were re-positioned to the bottom of the doors and changed from a lever-style to a pull-style configuration.
In 1973, the Kenworth badging was changed, with a redesigned grille emblem and hood badging. In 1976, Kenworth introduced the Aerodyne sleeper cab for the W900A. Distinguished by its twin skylight windows, Aerodyne was the first factory-produced sleeper cab with a raised roof.
After the 1982 introduction of the W900B, the W900 continued production in Mexico (Kenmex), adopting the latter model's rectangular headlamps. W900B (1982-present) During 1982, Kenworth introduced the W900B as a replacement for the W900A. While largely distinguished by its introduction of rectangular headlamps (though round headlamps initially remained an option), the W900B underwent further modification. To further accommodate increased engine cooling, the hoodline was raised, requiring the cab to be mounted higher on the frame. Since the introduction of the W900B, Kenworth has introduced two variants of the W900. In 1987, the W900S was introduced, adopting the sloped hood of the T800.
In 1989, the W900L was introduced as a longer version, extending the BBC from 120 to 130 inches. Initially produced as a limited edition (to commemorate a W900's appearance in ), the W900L went from becoming a limited edition to a full production vehicle. From the 1990s onward, the W900L would become one of the most popular vehicles sold by Kenworth. Since the introduction of the W900S and W900L, along with changes to the powertrain to comply with upgraded emissions standards, several functional changes have been made to the W900B. In late 1994, the Aerocab became an option for the W900B and W900L; shared with the T600B, the Aerocab featured a raised roof and a full-width curved windscreen (in one-piece or two-piece configurations); on standard-configuration day cabs, the two-piece flat windshield remains available. On day-cab configurations, the Aerocab roof design introduced an extended-BBC configuration. In 1998, the 86-inch Studio Sleeper was introduced as an option, among one of the longest factory-produced sleeper cabs ever produced.
In 2006, the curved windshield became available on the W900S for the first time. Current configurations. 86 in Studio Sleeper (218.44 cm). 72 in Aerocab Flattop (182.88 cm). 62 in Aerocab Flattop (157.48 cm). 48 in Flat Top Sleeper (121.92 cm).
38 in Aerocab Flattop Sleeper (91.44 cm). W900L with Aerodyne Studio Sleeper Variants Structurally, the W900 shares commonality with a wide variety of Kenworth trucks produced in North America through a wide variety of applications. K100 (1961-2002) In 1961, Kenworth introduced the K100 cabover model line alongside the W900 conventional ('K' standing for Kent, the first half of Kenworth). While similar to the K900 derived from the 900-series conventional, the K100 adopted the chassis and several design elements (including the doors) of the W900, with only minor structural changes made until its discontinuation. As length restriction regulations were liberalized in North America in the early 1980s, the demand for cabover-style semitractors fell sharply, with the K100 ending production in 2002.
After its discontinuation in the United States, the K100 remained in production in Australia until 2011, when it was replaced by the K200. While structurally similar to the K100, the Kenworth K200 features a redesigned interior and exterior grille design. C500 (1972-present) Introduced in 1972, the Kenworth C500 is marketed nearly exclusively in severe-service configurations.
Sharing its cab with the W900, the C500 uses a model-specific chassis, offered with multiple axle configurations (including versions with twin steer axles). T600 (1985-2007) Introduced for 1985, the Kenworth T600 is the first aerodynamically-enhanced semitractor, with a sloped hood, skirted lower body, and bodywork that closely integrates the front fenders and bumper. Sharing the cab and frame of the W900, the T600 differs largely with its radically sloped hood, set-back front axle, and air cleaners set under the hood. Although marketed alongside the W900 for its entire production run, the T600 was not developed as its successor; during the development of the T600, Kenworth achieved over 20% better fuel economy (compared to the W900).
Following the introduction of the T600, Kenworth would debut a wide variety of sloped-hood trucks based on the T600 and W900, including the T400 regional tractor, T800 heavy-duty truck (which remains in production as of 2018), along with medium duty trucks (the T300, followed by the T170/T270/T370/T470). While featuring changes to its front bodywork, suspension, and frame, the 2008-2017, which replaced the T600, shares cab/sleeper commonality with its predecessor and the W900. Through the late 1980s and 1990s, as a response to the success of the Kenworth T600, other North American truck manufacturers would introduce aerodynamically enhanced semitractors of their own, with the Ford Aeromax, International 9400, and Peterbilt 377 conventionals entering production along with the Peterbilt 372 and Freightliner Argosy cabovers. Kenworth T300 (medium-duty) Editions VIT (1976) In 1976, to commemorate the, Kenworth introduced a 'V.I.T' limited edition (Very Important Trucker) for the W900 and K100. Each model line was produced with 50 VIT vehicles, with each named for a different U.S.
One of the first Kenworth vehicles fitted with a stand-up Aerodyne sleeper cab (allowing for double beds and clothes closets), the interior was fitted with nearly every available option available on a Kenworth, including refrigerators and hot plates. While the 1976 VIT is a limited edition vehicle, the VIT name remains in use by Kenworth to denote its highest-trim interior configurations. 007 Limited Edition (1989) In 1989, a W900B appeared in the James Bond movie. To showcase its appearance, Kenworth produced a '007 Limited Edition' option package for the W900B. Adopting the same paint livery as the W900B from the movie, the option package was available for any version of the W900B, marking the introduction of the 'Extended Hood' option. Along with the specific livery, the option package featured several distinctive features, including gold-plated Kenworth badging, and James Bond '007' emblems.
The interior featured a number of electronics features, including a TV/VCR combination, cassette player, CD player (with CDs including soundtracks from James Bond movies), and a 8-speaker, 300-watt sound system. Coinciding with the 007 Limited Edition, the Extended Hood option was offered to all versions of the W900B, becoming the 130-inch BBC W900L.
ICON900 (2004) On the 25th anniversary of the W900L a limited edition model was released: the ICON900. This model is available in limited production numbers and comes with nearly the entire catalog of chrome 'brightwork' as well as unique badges to distinguish itself from the standard W900L. Appearances in media Through its half-century of production, the Kenworth W900 and its many variants have appeared numerous times on film and television. Along with the 1989 appearance a W900B in the James Bond film License to Kill (marking the first appearance of the W900L), one of the most famous appearances of the Kenworth W900 is the use of W900As in the 1977 film. Of the three different trucks driven by, two are 1974 examples while one is a 1973.
The Kenworth W900 also appeared in the French educational television program References.
.More than 100,000 Kenworth trucks are included in a recall in which water may leak into the windshield wiper motor, possibly causing the wipers to stop working on the “intermittent” setting, reducing the driver’s visibility. The water may also cause corrosion which, over time, could result in an electrical short. Model year 2011-2016 Kenworth 963, T270, T370, T440, T470, C500, C540, C550, T680, T800 and W900 models manufactured from Nov. 1, 2010, to April 7, 2015, are affected by the recall.
Paccar is still developing and testing a remedy, according to the recall notice.Paccar says during assembly, certain 2016 Kenworth models did not undergo the rear wheel mounting torque verification process, which could result in the rear wheels being loose and separating from the truck. Certain Kenworth T660, T680, T800 and W900 trucks manufactured between Feb. 1, 2015, and April 20, 2015, are included in this recall.
Paccar estimates 49 trucks to be affected in this recall. Kenworth will notify owners, and dealers will verify the rear wheel lug nuts are correctly tightened, free of charge. A notification schedule has not yet been released.Approximately 1,500 trucks are included in a recall in which trucks equipped with the Paccar MX-13 engines and Delco-Remy 40SI alternators have alternator charge cables that may chafe against a formed metal freon discharge line, which could cause an electrical short resulting in a fire. Included in the recall are 2014-2016 Kenworth T660, T680, T880 trucks manufactured from Feb. 18, 2013 to April 10, 2015, and 2011-2016 Peterbilt 386, 389, 567, 579 and 587 trucks manufactured from Dec.
13, 2010, to April 20, 2015. Paccar will notify owners, and dealers will reroute the alternator cable away from the metal freon line, free of charge.